Easy Tips to Care Car Batteries

FOLLOWING are some guidelines to treat a car battery. Car Care Tips Battery Check regularly the condition of battery acid (if you're wearing wet battery). If the indicator states the lack of water, immediately add the battery acid in accordance with the measuring, before the car is turned on in the morning. Battery acid should have always maintained between the sign of low-level and upper level (usually indicated on the side of the battery).

If you are under the low-level immediately added, and the maximum at the upper level line. Because, battery acid works to help cool the battery cells. If battery acid is reduced, the cells inside the battery may become deformed (curved).

Once filled with special water battery charger, set aside some time, just turn on your car. Periodically also please check the battery terminals (positive and negative). Check whether there is corrosion or not. Corrosion can be cleaned by spraying hot water on both terminus.

If you want to turn off the car, please turn off the first electrical components, such as outside lights, air conditioning, radio / tape, CDs, phone charger, and others. If the car will not be used in a long time, off the negative terminal on your battery.

Head of the battery is removed it so wrapped in cloth, to keep the negative terminal is not in contact with the body of the car. Every 3 months, if you visit to the workshop, please do check the condition of electrical charging of the car.

Age Car Batteries is usually one year. Can more than 1 year old, but it depends on maintenance of the vehicle owner.

Easy Ways to Boost Car Engine Performance

HUMAN basically has the nature is never satisfied. So often the owners of the car feel less comfortable with the performance standards of a car he had. For that there are various ways to boost engine performance.

The easiest is to port-polish your car engine. With the ported-polish, power from the engine can be increased without having to add devices such as turbochargers and superchargers racing or just replace the muffler though.

Ported-polish is the easiest way of improving the performance of the engine without the need for complicated What ported-polish? Porting is an attempt to reshape the hole cylinder head intake and exhaust so that the volume of air and fuel that go so getting bigger and more highways.

While polishing is an attempt to smooth bagianbagian already ported and some other parts of the machine so that the suction of air and fuel that go so more smoothly.

So basically Porting-Polish practice is intended to increase and facilitate the intake of fuel and air to power the engine can be fueled.

In addition the practice of ported-polish is also useful to reduce the usual scratches on the cylinder head. Because for many, the beret that is the one factor of the cylinder head so the manufacturer can not work optimally.

Usually the subject is the ported-polished cylinder heads and intake manifold. But that should be remembered, ported-polished to be done right. With this simple business car users can easily boost the performance of their cars.

Pull the engine will be lighter with a longer breath.

Comfort When Using the Car Rental

Need to travel with a lot of people but want to maintain the privacy and comfort? The best option would use car rental services.

Live telephonic message, plus a car where the driver was ready to deliver our goal, to return home. Besides not too tired than taking public transportation, travel became more effective because not a lot of time wasted in traveling.

Although look very practical, car rental service users need to consider several things in order to remain comfortable on the trip and get the maximum service from the owner of the car rental. After all, to rent a car, at least we have to spend around a pretty stout.

Before renting a car is worth estimating the number of people who will participate, mileage and purpose.

Type Avanza, Xenia, Innova good if used for business purposes because it includes a fairly prestigious cars. Carrying capacity are standard and comfort is assured. If for other purposes such as travel and need greater capacity, can use type or Travello Pregio.

Convenience are two types of cars are also great. The second thing is the distance. This corresponds to the time constraints we order when renting a car. In order to not have to pay more due to late from the appointed hour, factor in travel time round trip, long time at the destination and purpose of extra time for unexpected needs. Exaggerating a few hours so as not to be hasty deadline.

If for 6-10 hours in the city alone is sufficient. If it comes out of the city is usually about 12 hours. If further, more economical if you take a count per day.

For users with a tourist destination, he advised the select drivers who have extensive knowledge about travel destinations, good places to shop for souvenirs, culinary or souvenirs and crafts.

Usually they do have a partnership with the owner of the place of business, so there is a separate fee if you bring the tourists. To avoid unnecessary obstacles due to the condition of the car, it is suggested that prospective service users come to the car rental office.

Visit the office and look around the condition of his car. If necessary write down the license plate. Rental cars are nice, the condition of the car must also be guaranteed. Even if there is engine trouble on the road, another car should be launched to replace, "he said. For the calculation of the cost of fuel, there are rental rates already include the cost of petrol and drivers.

Better tenants buy their own gas as needed. More efficient and easier for tenants to owners of rental calculation.

Ensuring comfort when renting a car

If traveling is definitely more comfortable if you use the car wide. Especially if it goes with my friends or family. Choosing a comfortable rental car and capacity of many seems to be the choice of the most good. Choose a car that you want to definitely available on car rentals.

Select a travel agent who has a transportation partnership program. Select is also a car with a passenger capacity of the lot. The reason, of course, be more comfortable if worn long journey and the wider place. Its capacity can be for 13-14 passengers. Rental cars are usually well every customer who rented a car already includes the driver. So, no need to add the cost to pay the driver again.

If you return the car over the lease will be subject to charge per hour 10 percent of the rental price. Unless grab a bigger package it will be given a special discount. Usually the rental car will be full bookings during the holiday season and wedding season. Not only have rental cars at competitive prices and convenient vehicle.

Easy Tips to Care Car Audio

Car audio device not infrequently becomes a device that helps the driver to escape from the fatigue caused by prolonged driving or stuck in traffic. Therefore the audio must be arranged always in the best condition and ready to operate whenever needed. The key is to treat these devices as well. What things to do in caring for or maintaining the condition of the following tips on caring for car audio car audio.

The first thing that must be preserved is the electrical system or batteries. Accu must be really good because if no electric current is maximal or unstable. This could damage the components of an audio device. The second thing is the installation. This factor should really be considered, especially for owners who already mengupgade audio device. Most of the damage caused by the way audio installation that is less true. For example the laying of the cable snafu or speaker placement that does not fit. If it caught on something it goes bad.

Especially for the placement of speakers in the doors, it is suggested that the placement is not too into the door and be given a ring of wood on the outside. If not, then can hit the water when the car in the rain. Installing holds an important key in the treatment of audio devices. If installation is correct, then the treatment is quite simple, but if any, treatment is more troublesome.

The way was also influential in setting the audio condition. Do not adjust the volume of loud audio continuously for 1-2 hours. There should be jedanya. High volume setting will make the device power terforsir. If too long will overheat and could be easily damaged, he said. The dusty CD also thought not to be directly inserted into the audio.

Must be cleaned first, so that its optical drive can be durable. For cleanliness, advised car owners to prepare a small brush. For those that use 3-way speaker system, there must be some small speakers around the dashboard. Use a small brush to clean the dust on the sepaker.

Tips Buy New or Used Car

The car was not a luxury anymore. Transportation has been so absolute necessity for most people. Especially for those high mobility with the distance far enough. Mode of mass transport is still much to be reliable if it should be related to timeliness.

If you are planning on buying a car, of preparing a budget is the first thing to do. Large budget in accordance with an estimated price of the car as desired. If the goal simply to transport, buy a second car should be considered to save the budget. From an economic standpoint, buying a used car is actually far more profitable than buying a new car. From the aspect of price, the second car would be cheaper than new cars. Another advantage, it can be high priced. If we buy a new car then someday want to replace with a trade, price is definitely down, at least 10% of prices on the road. If a used car, sold again could even profit.

To buy a used car, there are a few suggestions to consider in order to keep a car whose condition is excellent. First seen of course is the condition of the body must be smooth. After the body is okay, try to power the engine. Experience what no noise or vibration is not normal. If the engine is okay, proceed with a test drive to determine the condition of the legs of the car. The latter just check the validity of the letters of the vehicle.

Car Tips Understanding Tire Codes and Their Purpose

Ever notice the text contained in the edge of the tires? There are listed some of the code numbers and letters stating specifications and designation of the tire. Most probably we rarely pay attention to those codes. The most commonly known owner of the car is the tire size, while the remainder entrusted to the store or place to change a tire repair shop.

There is a good car owner to understand the meaning of text and code on the tire. Because there are some differences in writing to the tires for passenger cars with wheels for other vehicle types, such as trucks for example. Tires for passenger cars, there is usually a size 7 codes are written. Each shows a large size, weight, width and use speed.

For example 205/60 R15 86H-writing DUCARGO GA. Figures 205 show the tire width in millimeters. Figures 60 shows the aspect ratio (serie / profile) or a high discount divided by the width of the tire pieces in percent. The letter R means the tire is a radial construction. The next figure of 15, is the rim diameter in units of inches. Figures 86 is the maximum payload that can be transported by a conveyor. Index for 86 is 530 kg.

The letter H in the back is a symbol of speed. Class H indicates the maximum speed limit that may be used with this tire is 210 kilometers per hour. There are several letters from M to N based on alphabetical order showing the speed limit of 130-200 kilometers per hour. H is the speed of the highest norm. For higher speed, using a three-letter symbol. The most recent article is Ducargo GA is the name of the type tread.

Car Alarm To Maintain Security

TO keep the car security, car alarm is absolutely necessary. From a wide range of car alarms are offered a variety of manufacturers, an alarm that has a feature the latest in the field of security is highly recommended.

These safety devices usually have a fairly complete feature which channel the alarm system, auto central lock, remote trunk release, hijack the system, separate hood, door-wire for input and 14 pin connector harness.

Choose a car alarm the famous durable and weather resistant. Car alarm prices can vary depending on the brand

Car Tips Transmission Error, Why?

Occasionally, we crashed a car transmission. For example, the gear lever back into neutral gear when moving from two to three. To be sure, the phenomenon will not occur in a healthy car. It signifies something is wrong in a car transmission. There are several reasons that could cause the third gear can jump into neutral.

1. Maybe the ratio third gear is damaged, broken or eroded. So though it was entered, did not want to gear the car ahead. Better informed in detail the cause to the garage.

2. The possibility never occurred pounding power is very strong that could damage the gear ratio of three to be destroyed. If the gear ratio is destroyed or gunduI obviously not going to continue movement to the wheel gear

3.Bisa sinkromes also damaged that the tooth can not enter or jump and the car can not drive in third gear.

4. Or rubber mounting cradle broken transmission. Resulting wobble when the engine is strong enough dihentak. This wobble may shift the transmission lever into neutral because it stuck with not under the cab.

5. Hub sleeve is worn on the system synchronism. So that the hub whose job as a drag if your teeth in. can not function due to wear, so if worn, can not resist any longer and jumped into the neutral gear

5. The cause of the detent ball, ball like a bullet there on the mechanism of transfer gear lever and fork sinkromes. His job held when the gearshift lever and the lever, there is a special hole-Iubang round. When the gears, it will lock the ball into the hole. Detent ball itself has been prepared in line ready to move the lever and push a button if there is behind it. If the ball has broken or worn, can not hold the lever again, and finally able to jump teeth.

It is necessary to disassemble the transmission to fix it. But no need to be able to do advanced workshop clear the existing garage to work on the credibility. Since the construction of a manual transmission with relatively little change from year to year is the same system works, the Home shop has capabilities in the procurement of spare parts, can certainly do.

Car Tips Correct Braking Techniques

Braking is the most important thing in mind when driving a car. Ironically there are many driver who do not know the correct braking technique.

Even in safety riding training curriculum, the braking material is material that is first taught in the menus while driving. Talk to engine brake, braking effect is caused by a decrease rotation speed of the engine (not for type matic), could help reduce vehicle speed.

But who could stop the vehicle is braking. If the braking technique is mastered, self-confidence will increase and braking distances can be shortened. In practice, you can try some braking. Ie using only the rear brake, front brake only and last try with the correct braking technique by using both brakes.

In ideal conditions try to feel and compare the resulting braking distance.

• Drive with a certain speed. To start, 40 km / h is enough to we can train basic techniques braking. Use up to 4 teeth.
• At the moment we decided to halt, the first thing to do is release the gas rotation (deceleration). The position of the hand is currently holding full throttle (no finger standby on the front brake lever).
• Then the next step is to pull the hand brake lever is squeezed forward in a way (such as shaking hands) and at the same time the brakes behind the right leg as a counterweight. Make sure the car upright position (not tilted) so that the risk of slipping does not occur.
• Just as a car would stop, pull the clutch lever so that the machine does not die and the lower left leg when stopped.

Car Tips Detecting Damage Brake Booster

Stepping on the brake pedal should not need to spend big power. With a bit of pressure just enough to make the brake pedal depressed and the vehicle speed control. When the brake, the pedal feels light. The brake pedal feels light was created for comfort in driving. We would be very disturbed when the brake pedal hard.

Among us, there must be an experienced brake problems when driving. For example, although the car brake grip (gripping tightly), but it often feels hard pedal when stepped on. Occasionally soft, but more often harder. Though the master brake has been replaced. Brake was new and still thick. But, it turns out this problem remains unresolved.

Is that because the brake booster? Indeed, the case surrounding the brakes will inevitably involve a component called the brake booster. Maybe also on the machine. Including the problem of the brake pedal hard. Among these components, most likely the brake pedal hard problems triggered by damage to the brake booster. Therefore, the brake booster is constructed to make the brake pedal lightly.

To detect whether or not defective brake booster, do the following steps. Turn the ignition to the OFF position (engine off). Roll (tap-off) brake pedal repeatedly to get the highest position of the brake pedal (foot still pressing the brake pedal). Turn on the machine. By the time the engine is on, the brake pedal will go down by itself (the position of the foot still pressing the brake pedal).

Then turn off the engine. At the time the engine dies, then the brake pedal must remain at the lowest position, and the pedal will go up if we do the reshuffle. When the test results did not correspond with the steps above, it is likely the source of the problem is the brake booster. Well, if proven that the brake booster problems, to overcome them should bring your car to the garage.

Because, to handle a minimum of brake booster must be replaced. In fact, it may also need to overhaul. For these two things, of course, should not be done alone. Then, what if the results of detection according to the steps above and showed no damage in the brake booster? Maybe the damage actually occurred in the installation of one way valve, or in vacuum.

Car Tips Check Brake System In Routine

MANY people have an opinion, if the cars from the road only. What is important can be used. But, what about stopping? This one is not to stop any origin. Could be forced to show my body if the brake system (brake) do not work perfectly. In order to remain able to function well to check some parts of the brake system. There are several symptoms that occur. When this component is not working normally. Like when the pedal brakes, car veered to the right or left. Chances are one of the front brake more quickly than the brakes lock on the other side.

The cause could be piston brakes are weak or there is a blockage in the brake hose to brake caliper or brake master. Another thing might be when applied, did not seem to want to stop quickly. Check the brake lining, the possibility has started thinning. Applying the brakes, round stationary disturbed? If it does get replaced the rubber brake booster. And if that's better done in a workshop alone. However, there are things that can dilakukakan own.

Most easily done, of course, check the height of the brake fluid in the tube. If not immediately added to the DOT brake fluid with the same. If any want to add, do not get past the maximum line marked on the tube. Note also the color of the brake fluid if necessary cloudy brake fluid depletion. Brake fluid is contaminated muddy dirt. It may be of rubber on the wall of the brake hose or a change due to frequent high pressure when the brake is operated. How? The old brake fluid be drained by opening the bolt on the caliper or master nepel brake.

As he relaxed, stepped on the brake pedal repeatedly so that the brake fluid out. Do not forget, put new brake fluid in the tube, to prevent colds. Every now and keep the lid nepel berulangulang tread brake pedal so the pedal back to normal height, and then reopen nepelnya. Do it until the brake fluid out of the clear nepel back. Please note also the brake hose. Clean the hose from dirt, then check carefully. Is cracked or slang is soft. To prevent leaks in the hose, if the ride was over 6 years old, this should replace the brake hose.

So is the deciding factor could mount the rate decreases, the brake lining. Do not hesitate to clean the brake in order to return to work either. All dirt should be cleaned, especially for brake systems are still drum. Because closed, a lot of dirt or dust in it so annoying brake systems work. In drum brakes, there are dislodged from the chassis, so it should be checked too closely the condition of the brake. If you already use a system of ABS (antilock braking system), if the ABS light turns on, immediately take it to the garage for inspection.

Stickers still Beautiful, Car Paint More Durable

Install the sticker on the car body is generally intended to add a pattern or color accent on the original car color of innocence. It could also be for purposes of branding for a particular company. As the car paint, stickers already installed on the car were also requires maintenance and cleaning. The goal of that sticker still seems interesting that the overall appearance of the car was still beautiful. There are a few suggestions that could be considered before and after installing bumper sticker.
Before installing the decal, first check the quality of paint. Original paint that still will not be disturbed if fitted sticker. But that does not paint a full body re likely to be peeled off if the sticker is removed. If repainted but only in-SPET in part, would be peeled off. Most car owners do not understand this and tend to blame the mounting stickers.

High-quality adhesive stickers will not damage car paint if exfoliated. One nice feature is the sticker glue is odorless. Available colors are also brighter and stronger, just like the color of car paint. Good quality can last up to 5 years. But a year is cheap wrote faded or peeling.

Car paint now that most contain elements of metallic colors require more rigorous treatment if fitted sticker. Installation of a sticker that simply stipping or certain motifs are advised not done for long periods of time. The reason is, this will make the paint become discolored if the sticker is removed. If not cleaned often and frequently bronzed, the use of stickers may still survive 1-2 years. But if rarely cleaned and are often hot, the paint was not covered stickers will be more dull than the paint that covered the sticker. This does not happen if the sticker attached nge-block the entire body. Even more durable paint.

The sticker is mounted on the car, attempted not exposed to drugs whose shape cream cleanser. Drug-shaped cream is left on the pore surface of the sticker, not as fluid is more easily cleaned with water. This will make the colors more stickers fade and not shiny anymore. Because it is porous, the more frequent washing, car stickers will be more shiny.rs

Automatic Car Door Lock

There are several types of cars not equipped with automatic locking system. Although already equipped with an alarm system, car owners such as the Honda City and the Nissan Grand Livina XV and some other types of cars still have to lock the doors manually before abandoning his car in the parking lot. Fuss, if I forget going nuisance.

To complete it, Maestro offers Auto Lock device. This tool is integrated with an alarm can be operated so that once a push, active alarms at once all the doors locked automatically.

Car Tips Tricks Make Tire Resistant Nails

ACTION the nail spreader to make road users either motor or car horror. How not, what would happen if a flat tire when on the road, when we are rushed time. To anticipate, some manufacturers make products unique accessories that can make a car or motorcycle tires are resistant or immune to spikes.

Among others, such as auto tire seal or a liquid that is inserted into the tire. There also are named as the magic glue that can patch the holes leak instantly when a nail puncture tires. If the motorist using this fluid, nail becomes impervious to vehicle tires. Because the liquid makes the situation inside the tire is always cold. So the mental and vehicle tire spikes leakage. Use of this fluid is better used on tires that are still in new condition.

Can be used on tubeless tires or tire wear in the tires. If the use of the inner tube, the liquid used before the inclusion of an inner tube. The resistance of this liquid in accordance with the age of the rider tires, not sticky, resistant to temperature alone how. The most important thing is environmentally friendly fluids. The liquid would be more effective when used in accordance with the recommended size. For the two-wheeler filled with 250 ml of a better one tire. While the car 500 ml. This fluid can also be used on bicycle tires. Better bicycle tire is filled as much as 125 ml.

When it finds there is a nail embedded in the tire, it is advisable to immediately revoke a nail or other sharp objects as soon as possible. The trick, shake it gently nail. If there are leaks, turn the tire until the liquid is covering the hole caused by a nail that punctured the tire. Auto tire seal is relatively cheap

Car Tips Engine Cooling System Maintenance

Attention to the other cooling system components are also necessary for the machine is always in top condition:

Flush and replace the coolant regularly. The quality and type of coo Lant used largely determines the durability of the engine, it is recommended to use Extended Life Coolant (ELC) or Surfactant C oolant (SC), some products sold ready to pour the coolant.

Avoid using tap water or well water to fill the radiator. use distilled water mixed with Coola nt as inhibitors (preventing rust and crust). The use of aq uadest alone can not prevent rust.
Radiator Coolant Use a good quality, and use ice UAI's recommendation.
Replace the radiator cap every 4-5 years, causing damage to the radiator cap can not remove the excess pressure so that it will damage the cylinder head gasket and head of the radiator, use the original radiator cap.
Replace the thermostat every 5 years, if you will be using the thermostat temperature lower than the recommended factory agree, do n more than 5 º C difference. Remember, do not be off the thermostat.
Check the fan motor performance or Visco fan.
Replace waterpump if already detected occurred kebocora n or weak water flow.
If the radiator is made ​​from plastic broken / cracked, replace the radiator and the resort to the original head, do not replace the brass, because in case of over-pressure, then the comp on en the other machine will be broken or cracked
Use radiator coolant for diesel engines should be me wearing a kind of extended life.

Fuel Efficient Cars: Observe Temperature Working Machines

If we use a used car or old, try to look at our car engine working temperature. See the needle temperature instructions on the instrument panel. Try also a time to ask the authorized repair shop or join the mailing list or similar car clubs to ask at what point our engine temperature under normal conditions. If the temperature needle indicates a lower temperature for example, only a quarter (normally half), then there are the following possibilities:

1. Thermostat has been revoked: Making the engine work in cold conditions, usually because of overheating have occurred on the machine, so the thermostat removed. Solution: Install the thermostat according to the size of the factory recommended temperature.

2. Thermostat jammed: Occurs when the thermostat is damaged so it is always in condition to open. Solution: Replace the thermostat according to the size of the factory recommended temperature.

3. Low-temperature thermostat work: As a result of using a thermostat that low working temperature makes the machine work at a temperature low employment. Solution: Replace the thermostat according to the size of the factory recommended temperature.

Tips Choosing Tires and Wheels for Car Racing

For the purposes of racing, the car must be capable of gripping the asphalt road to perfection. Hence, a tire that is used must have good traction. Such an ability is possessed by a compound made ​​from soft tires.

This type of softer tires. It is used specifically for racing. If it is used daily wear faster. Because the software, power cengkramnya better so that cars are safer when eating corner. Soft compound tire is still divided its kind to become a full semi-slick and slick. Full slick tires do not have grooves on the tread. Flat and smooth with no grooves. These types of tires have good grip on dry tracks. Opposite the semi-slick tires have a little groove with a besarbesar pattern.

Function plot to brush the water. So this type of tire designed in wet or slippery track, "he added. Because each tire has its own character. It is recommended that car owners who follow the racing event brings both, full and semi-slick slick. If the tire should be replaced soft, alloy wheels original wheels were advised to take luggage car.

If you want to replace the wheels, better if you use a wheel made ​​in Japan. The material is lighter yet more robust quality

How to Check Car Tires Safe for Wear

TIRE is bald and has less wind pressure increases the risk for car drivers. Therefore in addition to observing the tire pressure, you should also observe the degree of wear and damage to the tire. Better not let the tires car to be too thin. Each tire has a special mark indicating the minimum thickness of the tire. These marks are common on the outskirts of the tire.

In general, as reported by Goodyear, last week when the tire tread is no longer as thick as the tip of a match, then the tire is not safe to use. If there is an uneven level of wear on a tire wheel balancing it may be necessary or balancing.

7 Steps to Keeping the Car Air Conditioner Stay Cold

WE would always hope that the car air conditioner continues to provide the cool air in the cabin. However, if you remember to take care of him? And to keep the car air conditioner durable cold, just need to check the car air conditioner periodically once a year. You should turn off the switch the car air conditioner so as not to be wasted when the engine is turned on, it is useful as the austerity measures. There are parts of the car air conditioner to consider in the treatment measures and this can be done alone at holiday time.

• Check your car air conditioner hose, if there are leaks or not. Due to leakage of this section may cause the car air conditioner is no longer cold.
• Also check whether the receiver / dryer is still suitable to be used or must be replaced. Notice the indicator. When damage occurs, a quick change. Because if not, over time the damage will spread to other tools such as the expansion valve, compressor.
• Check also whether the lubricant is still adequate or need to be added.
• Clean the condenser. Because as a heat exchange (where the hot air circulation switch), will certainly a lot of dirt accumulate in these parts and can reduce the cold air produced by the car air conditioner.
• Also check the cooling unit. When this section is dirty, clean it immediately. Because if not, the cold air generated certainly can not break out because of dirt covered with thick walls of his unit. What's worse, it turns out can cause rust and if a leak can occur during cleaning.
• Do not forget to check the freon car air conditioner. Still worth it or not. To fill the freon or gas that must be examined first by the car air conditioner repair service.
• Also check and clean the evavorator this part of the dirt.