Jaguar C-X75 Supercar worth £ 800,000

Manufacturer British luxury sports car, Jaguar will spawn newest cars which will be prepared for 2013. The car with supercar basis, which of course is worth expensive.

The new variant will be issued this Jaguar C-X75 is a supercar. Currently C-X75 project still in progress and will be released to the market two years. A luxury car is worth 800 thousand pounds!

C-X75 will display a small car with a turbocharged gasoline engine with an electric motor (produced jointly with the F1 team Williams Grand Prix) on each axis.

200mph car will produce 99g/km EMIS blessing. All chassis made ​​from lightweight carbon closely. The plan, C-X75 limited to only 250 units made ​​and this project combines professional 100 workers in the UK.

Safety Tips for Your Car from Theft

For the following tips for your car safe from the hands of bad thief:

1. Try parking in
the light and make sure your vehicle is easily seen by the crowd. Parking in a bright and easily visible will make thieves think back to steal your car.
2. Wear safety devices
Key additions such as alarms and steering wheel to anticipate theft of your vehicle.
3. Do not leave letter
Valuable, bad habits which often do is leave the vehicle registration. So if the car was stolen, you give the thief was a complete comprehensive package plus car plus vehicle registration.

4. Do not leave items
valuables in the car, valuables such as notebooks, mobile phones, purses, etc. into one of the triggers thieves to unload your car.
5. Make sure all windows doors
tightly closed and locked the car before you leave your car. Negligence will facilitate the thieves in dismantling your car.

Hopefully the above tips can be a guide for you to maintain security Your favorite car.

Tips When Your Car Strike Hit By Floods

You have to be careful crossing the street flooding. If not, your car can be broken down in the street.

For those of you driving the car, be careful crossing streets under water. If not, your car can be broken down in the street.

Then, what should you do when a car hit by flooding? Here are some tips on handling the car after flooded quoted from various sources:

When the car hit by flood light:
- Check the condition of wheel bearings
- Check the condition of brake system
- Check the ABS system works
- Check the condition of tie rod and ball joint

Floods are:
- Check the condition of the engine and transmission oil, when mixed with water, replace with new ones
- Open the exhaust and air filter, if there is clean water and dry
- Make sure the engine can spin by rotating the pulley with the key
- Check the cylinder by opening the spark plugs, if there is water clean in a way start the engine with the spark plug condition is open all
- Check the completeness of electrical machines, such as starter, alternator, and the ECU. If there is water, clean and dry

Flood weight:
- Check the appropriate components on the flood light and medium category, and check for components that are in the cabin.
- Check all the ECU, combination meter, tape, relays, and fuse, and all the connectors that exist in the cabin. Make sure all free of water, then wash and dry using a blower or hair dryer.
- Take the car to the garage to get further examination

Who is actually making the Mini?

Austin, Morris, BMC, Leyland, Rover? Who is actually making the Mini? In 1959 when the Mini was launched, Austin and Morris Motors Motors has just joined to form the British Motor Corporation or BMC but for products still using the brand of Austin or Morris even though they are identical. In 1969, BMC joined with Leyland Cars, Jaguar and Land Rover to form British Motor Holdings but soon bought by Daimler and Jaguar BLMC renamed British Leyland (BL). This year, the names of the Austin Mini and Morris Mini eliminated and only a Mini, but for the international market the manufacturer's name continues to be used, such as in Indonesia remains a Morris Mini, while in America the name of the Austin Mini was still in use. BL holds licenses for brands such as Austin, Morris, MG, Land Rover, Wolseley, Riley and Leyland.

Entering the 1970s, the Mini is often called the Leyland Mini. In the period 1980, BL was nationalized because of financial problems and merged with Rover, so the company name became Austin Rover Group and Land Rover under British Leyland Group PLC. This time the name of the Austin Mini re-used. Then the Land Rover was bought by Ford and the company's name to Rover Group in the 1990s.

Since the late 1980s, the names of Austin and Morris are no longer used for cars. Name Leyland intended specifically for truck production. Mini itself is called a Rover Mini. In 1994, BMW bought Rover and the name was changed again into MG Rover Group. In 2000, BMW sold MG Rover and then in 2004, MG Rover is officially bankrupt and its assets were sold. Now the car brands are among others: Mini (MINI) owned by BMW, MG (as well as brand Austin, Morris, Wolseley and Riley) owned by SAIC China, Jaguar, Daimler and Land Rover, owned by Tata Group, India. Now, there is no longer British brand which is fully operated by a British company.

Although the company name change, the Mini throughout his life ever produced in Oxford (early 60s), Spain (70), Australia (60s and 70s, most of the Mini Moke), and Portugal (80s, specifically Mini Moke), also in Chile, Belgium and South Africa. But most of the Mini is produced in Longbridge factory in England.

Mini Cooper S Won The Rallye Monte Carlo

Mini Cooper S won the Rallye Monte Carlo three times, namely in 1964, 1965 and 1967. Should have in 1966, also won the Mini Cooper S Rallye Monte Carlo Rally but was disqualified by officials.

Since the beginning Rally 1966, tension has been felt the British Motor Corporation's team included 3 Mini Cooper S. Officials changed the rules suddenly, scrutineering an extremely rigorous and thorough examination, especially for the Mini. Word got out that officials do not want the Mini Rally rallied to win 3 times in a row aka Hattrick.

When race walking, and the Mini won first position in his class, and team officials rally scrutineering immediately dismantle the Mini-winning and examine closely all the components. All engine components are considered to deviate from the standard engine rule is questionable and can be proven by a team of BMC that their cars comply with the homologation (down rally car must berspesifikasi production car with a minimum production of 5,000 units in the previous year). In the end, the Mini was disqualified with an error that the fog lamp filament on the Mini is not in accordance with French traffic regulations. This applies to all UK car production, so in addition to the Mini, cars like the Austin-Healey, MG etc. also participated in disqualification.

Rally winner eventually become a Citroen, the French production car. Automotive world was an uproar with this decision. Citroen racer, the Pauli Toivonen to the extent that was embarrassed by the incident and did not want to race with Citroen team again. French auto magazine even to compare the rally car Mini Cooper S Mini Cooper S with the car brand new from the showroom and test the condition of the rally. As a result, the Mini Cooper S from the showroom actually recorded times better than Rally car. This proves that no engine modifications that violates the rules, and disqualification Mini is a mere political reasons.

The following year, 1967, Mini and BMC team won revenge with 1, 2 and 3 in the Rallye Monte Carlo! All of these publications into a kind of free publicity for the BMC and Mini sales also increased after the incident.

Morris Mini Machines

Variations Morris Mini machines they are all different, but generally must use the original engine Morris because if you want to use another car, no place. Morris had a code machine A-series engine. For the period of 59-69 years, usually beginning with the machine code for the brand-xxxx MA2S Morris, AA2S brand-xxxx to Austin. 2S means Saloon 2 doors. After year 69, beginning with the machine code into XL-2S-1N-xxxxxx. In the same year in the UK use of the brand and the Austin Mini Morris Mini is lost is replaced with a Mini course.

There are 3 pieces of a common engine capacity: 850cc (848cc), 1000cc (998cc) and 1300CC (1275cc). Engine 850 is produced from 59-80, 1000 engine produced from 69-93 years. Early 1275 machines used on the Mini Cooper S production in 63-71. Then used also by the Mini 1275GT from 69-80 years. In 1990, engine 1275 is used again. In 1993, all Mini 1275cc engine wear. Rover Mini Cooper 1275 Injection engine wear since 1991, followed by the regular Mini in 1994.

Mini transmission has 4 forward speeds and 1 reverse speed. Automatic transmission is available since 1964.

Carburetor Mini since the beginning is SU Carburetors. from the years 1959-1974 using HS2 carburetor diameter 1 1 / 4 inches. Since the year 74, using HS4 carburetor larger diameter 1 1 / 2 inches. All Mini Cooper years 1961-1970 using double HS2 carburetor. Mini Cooper in 1990 using HIF44 carburetor diameter 1 3 / 4 inches.

Synthetic Oil Vs Mineral Oil For Car

All both mineral and synthetic oils are both a standard fire.

Advantages compared to mineral oil synthetic oil:
- More stable at high temperatures (less volatile)
so that low levels of evaporation
- Control / prevent the occurrence of carbon deposits on engine
- Circulation more smoothly in the morning starting time / cold weather
- Lubricate and coat the metal better and prevent it from occurring
friction between the metal resulting engine damage
- Resistant to change / oxidation and therefore more durable
so it is more economical and efficient
- Reduce the occurrence of friction, increase power and
cooler engine
- Contains a better detergent for cleaning
engine of the crust


Mineral oil is usually made from purified while the synthetic oil from the chemical mixture. Materials usually PAO synthetic oil (PolyAlphaOlefin).

Mineral oil API SL So the quality is not the same as API SL Synthetic oil.

Synthetic oil is usually recommended for the latest hi-tech machinery (turbo, supercharger, DOHC, etc.) are also in need of better lubrication (racing) where the gap between parts / metal smaller / narrower / precision where only synthetic oil that can coat and flowing perfect.

So for engines manufactured in 2001 or older are advised to use good synthetic oil-type semi-synthetic (mixed with mineral oil) or fully-synthetic.

Fully synthetic oil price could 2X - 4X more expensive than the semi-synthetic.
Semi-synthetic oil price can be 2x more expensive than mineral oil.
If it is for everyday use quite a semi-synthetic.

LUBRICATING AND PACKING PLEASE NOTE AVOID FALSE LUBRICATING
Buy a lubricant which is packed with good, still sealed with neat, there is a corporate identity and purpose of use. Avoid buying goods that are defective packaging. Buy a lubricant on the official agent or in places that can be trusted by you or the recommendation of your colleagues.

Now you are certainly more aware than ever about the quality of oil. So for now circulating in Indonesian oil for gasoline engines API service SL downwards, while for diesel engines API Service CH4 down. We recommend that you use oil that has the highest API certification because it will give better results for your vehicle better than the performance and maintenance of vehicles in the long term.
Synthetic oil is more expensive than mineral oil but we can choose a semi-synthetic is better than mineral oil and is more economical than synthetic oil.

Select The Right Viscosity Lubricating

Select The Right Viscosity Lubricating
Lubricant viscosity level which is also called "Viscosity-Grade" is a measure of lubricant viscosity and the ability to flow at a given temperature
Oli identifier code is a letter SAE which stands for Society of Automotive Engineers. Furthermore, the number who follow behind, shows the level of the oil viscosity. SAE 40 or SAE 15W-50, the greater the numbers that follow Code indicating the thick oil is oil.
While the letter W located behind the initial figure, which stands for Winter. SAE 15W-50, meaning it has a high viscosity oil SAE 10 for the conditions of cold temperatures and SAE 50 in summer temperature conditions. With these conditions, oil will provide optimal protection during the engine start in extreme conditions though.
Meanwhile, in a normal summer conditions, oil will work ideally in the range of 40-50 viscosity number according to SAE standards.
See Manual Vehicle ...

SAE GRADE LUBRICATING GUIDE FOR MOTOR VEHICLE PASSENGER
Grade Lubricant consisting of singlegrade / monograde such as SAE 15 and SAE 50 (used at extreme temperatures) as well as Multigrade SAE 5W-50 and 15W-50 is widely used (unless the temperature is very hot or very cold) because it is quite watery lubricant to flow at low temperatures and thick enough to work satisfactorily at high temperatures.
More specifically we use the following illustration:
There are 3 Oil, 1 Multigrade, 2 monograde
Oil 1 SAE 15 (dilute)
Oil 2 SAE 50 (condensed)
3 Oil SAE 15W50 (Multigrade)

Oil was taken third place, the cold temperature:
Oil 1 (SAE 15) will be more viscous due to cooler
Oil 2 (SAE 50) to freeze because their home has been condensed
Oil 3 (SAE15W50) Oil viscosity will be equal to 1 (SAE15)

Now all three Oil was taken to place the hot temperature, then:
Oil 1 (SAE 15) becomes very watery even be yawning all
Oil 2 (SAE 50) becomes more dilute
Oil 3 (SAE 15W50) Oil viscosity equal to 2 (SAE 50)

Watch Your Car Lubricant Quality

Appropriation WATCH AND QUALITY OF LUBRICATING
Note the designation lubricants, whether digunaan for gasoline engine oil, or diesel, 2 stroke or 4 stroke, industrial equipment, and so forth.
The quality of the oil itself is usually indicated by a code of API (American Petroleum Institute) with a letter followed by a stage behind him. Example API: SL, code S (Spark) is indicative of engine oil for gasoline. The second letter code indicates the value of oil quality, getting closer to the letter Z, the better quality oil in the coating component with a layer of film and more in accordance with the needs of modern engines.
There are two groups of API service categories are:
1. API Service Categories for gasoline-fueled vehicle lubricants
2. API Service Categories for diesel vehicle lubricants



API SERVICE GASOLINE CAR ENGINE LUBRICATING

- BC = can be used for all new tech car engine
and before (safe for all cars). Lubricants categorized SM is designed to provide sediment control better high temperature and is designed for more efficient use of lubricants. In some oil meets ILSAC certification or qualification as an energy saving
- SL = for vehicle engines in 2004 and earlier
- SJ = for vehicle engines 2001 and earlier
- SH = for vehicle engines 1996 and earlier
- SG = for vehicle engines 1993 and earlier
- SF = for vehicle engines 1988 and earlier
- SE = for vehicle engines 1979 and earlier
- SD = for vehicle engines 1971 and earlier
- SC = for vehicle engines 1967 and earlier
- SB and SA = is not recommended

API SERVICE AUTOMOBILE DIESEL ENGINE LUBRICATING
- CI-4 = Introduced on 5 September 2002, for
4T engine, high speed. Formulated to maintain engine durability. Can be used to replace the lubricant category CD, CE, CF-4, CG-4 and CH-4
- CH-4 = Introduced in 1998, to 4T engine,
high speed. Can be used to replace the lubricant category CD, CE, CF-4, and CG-4
- CG-4 = Introduced in 1995, to 4T engine, load
weight, high speed using fuel with sulfur content of 0.5%. Can be used to replace the lubricant category CD, CE, and CF-4
- CF-4 = Introduced in 1990, for engine speed 4T
high with a turbo charger or exhaust normal. Can be used to replace the lubricant category CD, and CE
- CF-2 = allowed for 1994, to heavy load engine 2T,
Can be used to replace the lubricant category CD-II
- CF = Introduced in 1994, for off-road vehicles,
indirect-injection diesel engines and other diesel engines that use fuel with sulfur content above 0.05%. Lubricants can be used to replace the CD category
- CE = Introduced in 1987, to 4T engine, speed
high with a turbo charger or exhaust normal. Can be used to replace the lubricant category CC, and CD
- CD-II = Introduced in 1987 for 2T engines
- CD Introduced in 1955. For turbocharged engines
as well as ordinary waste gas
- CC = to a machine that was introduced in 1961
- CB and CA = is not recommended

API SERVICE DOUBLE
In most of its service API oil in the car usually is twofold. As an example of API SL / CF. Meaning: The first API that shows the main use of oil, which are on the gasoline engine with qualifications SL but in an emergency oil can still be used in diesel engines with CF qualification.

Function and Choosing Right Oil For Car

FUNCTION OF OIL
In general we assume that the main function is as a lubricant engine oil. Though oil has another function that is not less important, namely, among others, as cooler, Patron of Rust, cleaners and Closing Gaps in the wall machine.

All these functions are very closely related, as lubricants, oil will create friction between the components in the engine move more subtle, making it easier for machines to achieve an ideal working temperature.
Additionally Oil also acts as a heat transfer fluid reaches the combustion chamber of 1000-1600 degrees Celsius to other parts of the engine cooler.

With the level of consistency, adjusted for volume and capacity needs of the machine. The more viscous oil, the level of leakage will be smaller, but the other resulted in increased workloads for the oil pump.
In addition, the content of additives in the oil, will make a film on the cylinder wall in order to protect the engine at the start. At the same time prevent rust, even if the vehicle is not used for a long time. Beside that also contain detergent additives in lubricants to function as a solvent for impurities result of burning residual oil turnover time is wasted.

CHOOSING OIL

Increasing number of oil options at this time, will certainly make us a little confused, because all the oil producers would say they are the best oil. But there are some things that might be used as a reference, among others, recognize the character of your vehicle, engine specification and which the majority of your driving environment (temperature, humidity, dust, etc..).

Porsche Design Offers Complementary Travel Package

IF you travel far, using a Porsche is the worst option, unless you are the owner or the Panamera four-door Cayenne latest. Because most of the Porsche product was minimal luggage space.

Fortunately, Porsche Design has released a suitcase full of products and accessories for long trips that are specially made for the Porsche car line.

Part of the Porsche Design Driver's Selection of Travel Collection, which offers a selection of new ultra-lightweight luggage from the hard-shell polycarbonate material, AluFrame with wheels and exclusive leather bags.


The product is made ​​and specifically designed so that di'cemplungkan fit 'into the trunk of the Porsche 911, Boxter, Cayman, Cayenne and Panamera, and can choose the colors to match your Porsche car paint.

To cap it all, there are additional accessories such as wallets, jackets designed for travel and dark glasses for driving. So for those who claim to be fans and owners of Porsche fanatics, not complete its status if it did not have a product developed by Porsche Design this.

World's Fastest Taxi Porsche Panamera Turbo Taxi

TO meet the needs of taxi service is the fastest in the world, the Porsche Panamera Turbo Taxi is the answer. He operates in Germany every day waiting for passengers who generally call center in a hurry.

If you climb the Porsche Panamera Turbo Taxi, just get ready to experience a boost in the form of energy produced V-8 engine twin-turbo 4.8-liter is capable of producing 500HP with lipmpahan 700Nm of torque at the wheels.


Taxis in Indonesia, the majority use the Toyota Vios with Toyota Limo another name. Though Toyota Limo in Thailand taken from variant Toyota Altis. Looks like a limo used Toyota vehicles earmarked for the taxi fleet.

How about the Porsche Panamera Turbo Taxi?. They seem not to be outdone by Toyota. At the rear cab nan sporty luxury Porsche, it is well marked inscription which reads 'Taxamera'. Maybe if they use a variant Carrera Turbo, its name will be 'Taxarerra'.

Old Porsche With Helicopter Engines!

Cars with the highest speed on the highway are often created. But what would happen if a car equipped with a helicopter engine Boeing?

The man from Oregon, United States (U.S.) has been successfully installed into the Porsche engine Boeing 982 lasiran 1982.

Turbine jet engine from a helicopter QH50 (Vietnamese version) chosen this guy to produce power 350 bhp (272 kW) with peak torque to 700 lb-ft (948 Nm) of the old Porsche.


"Although it should be able to power of this car can reach 550 bhp," wrote Worldcarfans as quoted on Friday (07/16/2010).

Besides able to catapult extraordinary power, it turns out the use of jet engines can produce a fire that could shoot out with temperatures up to 270 degrees Celsius.

Mitsubishi Lancer Evolution XI with New Technology Hybrid

Mitsubishi Lancer Evolution is one of the mainstay products of Mitsubishi Motors Corp. (MMC) in the compact sedan segment. This series is even in the event of Mitsubishi's iconic rally the world in the era of the 1990s with the Lancer Evo II and III. Now enter the generation-XI, bearing the three diamonds manufacturer retains character as a sedan powered gahar. Only, the technology is environmentally friendly and brought the hybrid system.

Citing Leftlanenews.com, last weekend, the hybrid is applied to the Evo XI applied from the PX-MiEV which was exhibited in Tokyo Motor Show (TMS) last year. Electric motor carried off from the i-MiEV and combined with 2.0 L MIVEC petrol engine four-cylinder turbo-powered 320dk.

The function of the electric motor drives the front wheels, while the gasoline engine delivering power to the rear wheels. So, when walking in the city, will be more dominant electric motors used to drive a car. Although green tech, toughness Evo as gahar powered cars are still maintained. Evidence, acceleration 0-96 km / h reached in just 4.5 seconds.

The advantages of this car is hybrid system and plug-in lithium-ion batteries that could improve the ease of driving. In addition, these devices also make the fuel consumption is much more economical.

Various other features are being prepared, among others, active steering and roll control suspension. Apparently Mitsubishi Evo will launch this new product in 2013.

Special Edition Porsche 911 From China

To celebrate his birthday is the 10th Porsche China issued a special edition of 911. On the basis of this special edition Turbo S comes with gold exterior with a carbon fiber hood, carbon fiber rear spoiler and Sport Classic 19-inch wheels.

In the interior cabin is equipped with Alcantara sport seats, carbon fiber and motifs that emphasize the impression of sports, and exclusive sill plates. For others plus a sports steering wheel design, unique carpet, and given a special symbol for this edition.


For the engine as in the standard model with power provided by six-cylinder engine turbocharged 3.8-liter. Which produces 530 PS (390 kW / 523 hp) and 700 Nm (516 lb-ft) of torque. This resource is associated with MDD seven-speed transmission, which allows the car accelerates from 0-100 km / h in 3.3 seconds. And kept going to the highest speed at 315 km / h, for the production of this car is only restricted to 10 units only.

Spyshot Toyota Yaris 2012

Toyota Vitz or known as the Yaris in the country is getting closer to the day of its release in Japan. The signs shown by the appearance of a mini web site that was prepared specifically for the presence of this small hatchback.

This Japanese-language site showing the presence of certainty Vitz in December this year with some photos detail changes to the exterior and interior. In addition, there are other clues about the Smart Stop technology that will be offered at one of the variants.

The photos detail that is on the site match the leaked brochure pictures circulating on the internet a few days. As Kompas.com had preached before, the pictures give the appearance Vitz / Yaris a more aggressive, with sharper angles and a larger dimension.

Vitz on the brochure has a dimension of 100 mm in length increases, lower 20 mm, and the wheel axis distance was 50 mm. With this change, the means increasing Yaris roomy cabin. In Japan also will attend 17 exterior color options and multiple color variations in the interior. Some body kit options are also offered in this country of the Rising Sun.

Latest 2011 Honda Jazz

Honda Jazz variant of Honda cars sold in Indonesia most experienced again refreshments. From the Japanese Honda has announced plans to do a facelift for the Honda Fit or Jazz. Of course with this change in the Honda was able to maintain sales levels.

Striking changes is the design of a new front bumper and grille. There are two new colors are offered one of them "Vibrant Lime Green Metallic" as used in Jazz Hybrid. On the interior side of the rear bench seat can recline features extended back to 73 mm so that rear passengers can be more comfortable. Several other changes are cruise control, remote entry, an audio system AM / FM / CD with four speakers, a USB audio interface2, auxiliary audio input jack, MP3/WMA playback, Radio Data System (RDS), power windows, power mirrors, and power door lock.

Futuristic Concept Car The Eco-Friendly

Bio Top is a futuristic electric car that features three wheels, one of which could produce electricity as well. Cars Bio Top uses wireless technology to transfer electrical power, generated by the rear wheels and ball car to recharge the battery when the car moves.

Nice Old Sportscar Caterham Seven Lambretta Limited Edition 2010

Caterham Cars has teamed up with Lambretta company for four-wheel vehicles, legendary Seven sportcar Special Edition 2010. The British-Owned fashion label, based in London's famous Carnaby Street, on the characteristics and rich legacy in popular culture to be booked in advance, adapted to the needs of Caterham, who shouted 'Britannia'.

Body painted model decals and uniforms do not leave the UK culture called the Union Jack are red, white and blue in the paint. Of course, the theme of the color scheme that matches the leather seats, dashboard, carpets and boot. Stitch seats, embossed motifs and wheel Lambretta Moto-Lita follow detail the interior.


At the wheel, Caterham include Ford 1.6-liter Sigma engine, which can issue a power 125bhp, Lambretta Special Edition with a weight of 120lbs and torque to move the body mild to 60mph/97kmh in just six seconds. Blend of quick-fire five-speed gearbox, with a strong chassis, providing power responsive and unique characteristics of each driving a car this unique Seven.
Available in English, Caterham Seven Lambretta Special Edition price £ 26,995 or the amount of Rp 378 million.

5 Safest Cars In Europe

For those of you who put the safety factor in choosing a car, probably the result of testing the European New Car Assessment Programme (Euro NCAP) - National Institute of Occupational Safety Car in Europe - could be a reference. There are five new cars that have been and will be marketed in Europe received five stars from NCAP safety. Fifth CT 200h Lexus vehicle, the Volvo V60 wagon, Ford Focus, Nissan LEAF, DS4 Citroen and Peugeot 508.

Of the five cars, two of them environmentally friendly vehicles that have a safety level equivalent to the car "normal. " As CT Lexus 200h (hybrid) are labeled as "stable" for the driver and passenger from the front when the collision occurred. Although the gas pedal pushed to the up to 56 millimeters, but the hips, thighs, knees, and feet escaped injury.

Electrical safety features like stability control activation could affect up to 86 percent, while the safety for pedestrians who hit only 55 percent. Safety for children is also high, providing protectionto head , includingthe movement when the collision occurred . The positive results obtained from tests on children aged 18 months to three years. If on average, owned Lexus safety for adults judged to 94 percent and 84 percent children.

One again, the electric-powered Nissan LEAF predicate able to achieve the most secure in Europe. From the test results, aimlessly value of 83 percent for the safety of children. Although there were several movements in the cabin (when hit) 72 mm into the gas pedal, which sustains Pillar A windshield was also bent 21 mm. For adult passengers are given safety level reached 89 percent, 65 percent of pedestrian safety (pedestrian) and car safety features up to 84 percent.

Easy Way Care Coating Leather Car Seats

Upholstery leather car seats have a number of advantages over fabric or synthetic material. This material emits the impression of more luxurious and comfortable. If stained or exposed to dirt, how clean it is also easier than the two ingredients that.

However, the price is more expensive types of coatings. In addition, if not treated properly, leather upholstery will be broken. When that happens, then the process to restore its original condition is very difficult and expensive.

"Because of the material was by no means skin human skin is vulnerable to weather, or treatment that is not good," said Mohammed Fajri, specialist upholstery and bekleding Victory, Kemayoran, Central Jakarta, Friday, May 27, 2011.

But not to worry, because treatment of the leather seat upholstery was pretty easy. "The key, only painstaking and careful. The materials used were not expensive and readily available, "said Fajri.



So how do the treatment? Here are tips from Fajri:

1. Avoid sunburn
Much like the human skin, leather seat upholstery is also absorb heat. Only, the difference, the pad can not adapt and neutralize the solar radiation using body fluids such as when a cow skin.

As a result, ultraviolet radiation will be absorbed by the skin sheet. As a result, this layer will harden. If it is often the case then the sheet will rapidly develop cracks.

Therefore, it is advisable to park the car in a place that is not exposed to direct sunlight. When forced to park in the open, then use protection or sun visor.

2. Clean regularly
In addition to preventing from sun, clean the upholstery of the leather upholstery at least once every three months. You do not have to go to a salon car to clean it.

However, one thing to remember do not use a dry cloth. Use a wet chamois cloth. "Do not wet with water but use a special moisturizing leather seats are sold at the accessories store," said Fajri.

If not, you can use baby's skin moisturizer or baby oil. How to clean, simply wipe with the direction of motion.

Such movement is meant for the dirt that slipped in the pores of the skin sheet can be lifted. "Then wipe with a two-way back and forth, the dirt it will go into the pores, so that the layer dirty seat instead," explained Fajri.

Dirt on the pores and in large quantities will be fused with humid air in the cabin of cars and solar radiation. They chemically react and lead to chapped skin layer or wrinkled.

3. Avoid liquid spills that damage
Avoid this seat upholstery spilled water. The reason, besides the potential to cause stains, spillage of water could cause mold if not dried quickly.

Another thing to remember is, do not use cleaning fluids containing alcohol, spirits, thinners, detergent, shampoo, and similar fluids. The reason is, all the liquid substance has the potential to damage the tissue in the skin sheet, remember layers are derived from living things or cow.

"When you use a liquid cleaner, make sure the liquid is safe not to use material from the alcohol and the like," said Fajri.

4. Make sure the car is not damp cabin
Mistakes that often occur but are not aware car owners who use the seats in leather is to let the car cabin damp. In fact, such conditions could potentially trigger the onset of mold on leather seat upholstery.

When that happens, then the coating will be broken or wrinkled. Meanwhile, to restore the skin layer is wrinkled or broken as in the past is very difficult and too expensive fare.

Clutch Car to Long Life

Canvas clutch does have a life. The more intense the canvas work, the faster the thin surface. When you are thin, an important component in the vehicle drive system should we replace it immediately. On average, once every 4 years. However, do not get me wrong. Many riders who have to replace the canvas clutch much faster than they should. Not solely because of quality problems. But, because of errors in the style of driving. As riders, we can slightly extend the life of the canvas clutch when treated appropriately.

Some time ago, I never called for when driving a car we do not often tread half clutch. The effect of wear is very clear. Stamping a bear like this puts the canvas clutch friction at very hard. That is why the surface of the canvas will be more quickly eroded. This habit is still often done by the rider. Especially, in solid lines and when climbing. They argue, with a half step on the clutch, the engine will not die. Some validity, but more cause losses. That's why we put it in the first place.


The second way that we have to consider is when you remove the clutch pedal. Canvas clutch would be much more durable if when doing shift the transmission, we do not release the clutch pedal stomping. Remove it slowly. And third, the use of the transmission gear must be in accordance with vehicle speed. Do not accustomed to using high gear when the car speed is low. This habit is still often done the rider. For example, use 4th gear when the vehicle speed is only 20km/jam. Actually, all these calls related to the position of canvas clutch. As part of the vehicle drive system, couplings and their canvas into components of the link between the engine and drive wheels. He served to continue the power generated from the engine to the drive wheels spin. So-wheel drive vehicle capable of moving the total load. Canvas clutch will be longer age when she really we place solely as a liaison. Not as a drag load of the vehicle. Way, follow the above three habits.

Interior Car Care Tips Made From Leather

Here, tips on how to treat the interior of Ford cars that use leather:

1. Caring for leather car interiors are generally more easier than treating fabric material. Leather does not easily absorb liquids, dirt, food scraps or dust. However, good care is needed for interior surfaces clean and shiny. And to maintain resilience dikhas pores in the skin surface.

2. Each time you wash the car, the seat surface should be clean, the cover doors and other interior leather using a damp cloth (a special cloth car wash.) Instead, clean the leather interior of your car on a regular basis using a leather cleaning materials available in stores accessories. And most importantly, immediately clean the skin surface if there are any remaining food or liquids that can leave scars.

Ethics Phone While Driving

Despite warnings not to phone while driving is often done, it is still more people who consider this warning lightly.

So do not be surprised if many collisions occur because of ethics cases on the phone while driving is not executed. Instead of sanctions with your abilities on the phone with one hand, but without realizing the risk of collision arises precisely because pacahnya driver concentration.

From studies ever conducted shows that using the HP while driving increases the risk of an accident up to four times. Accidents associated with the use of HP in Japan, most often occurred when the driver received a phone call.

Therefore, some countries have banned the use HP when driving. Although the use of hands-free is still allowed. However, there are a few tips on using HP when driving, among others:


1. Take advantage of features such as automatic redial and memory dial on your cell phone. Learn also use the keypad to use the speed dial without the need megalihkan attention from the road.

2. Use a hands free kit or put HP in the coverage of the hand, so do not need eyes off the road just to pick it up. If the condition does not allow you to answer just ignore the phone and let voice mail answer it. Just after the road is safe, you call back.

3. Immediately stop the conversation when you're in a dangerous traffic situation. Heavy rain or heavy traffic and at high risk for traffic accidents and that will definitely break the concentration driving.

4. It would be better if you step aside for a moment utuk phone with the speaker or do when traffic lights are red. But remember, do this in a safe place and do not belong in areas with high crime.

5. To discuss business talks tough and serious, never done when you're driving because it tends to disturb the concentration in driving

Tips for Keeping the Air Inside Car For Not Being Hot

Once you park the car more than 1.5 hours in the hot sun, then you get into the car, certainly seemed like the heat in the desert-in the daytime. Especially if you've just come out of your client's office with a variety of issues that you have to finish up, Well, so your head does not go "hot", follow these tips to minimize the temperature inside a car even if you had parked it in hot .

- Use a good quality window film
Select a window film with a thrust of heat is very high (40% -90%). The price is more expensive, but apart from a longer working life, will also increase your safety while in the car.

- Avoid skin seats
Leather seating does look more luxurious and comfortable, but comfort would be reduced when the seat is exposed to the sun, because the nature of the skin that absorbs heat.

- Try to park in a cool place
Nothing is more comfortable than your car apart parked under a shady tree, or in the building parking lot that is not exposed to heat. If possible you should park the vehicle in the parking lot of closed public.

- Use a sunshade screen
You should always provide a screen sunshade to protect the sun coming in from your windshield. Usually this is used in the windshield of your car when the car was parked to block the sun

Car in Maximum Condition After Long Journey

Long vacation is over. The long journey has also been finalized. Now the majority of vehicles, what is a car or motorcycle in urban areas back to original function. As a personal vehicle lane in the city, with a range of travel is shorter.

After a long journey, the vehicles need to be carefully considered in order to stay healthy. Who knows after a long journey taken our vehicles have a little problem. Or there are changes in setting.

Here are the steps that can be used as a benchmark to ensure the health of the vehicle after running tasks take a long vacation.

1.Eksterior and Interior

Clean the exterior and interior of the vehicle from the discharges. If too long attached, these impurities can harden and cause body paint (exterior) dull and defective vehicles. In the interior, the dirt is not cleaned will cause odor.


2. Tire

Check tire condition and pressure of the wind. Do not forget to normalize back tire pressure (before a long trip riders usually increase the air pressure to avoid the occurrence of hydroplanning).

3. Water

Check battery water, water radiator, and windshield wiper washer water from possible reduced. Add if the amount below the minimum threshold.

4. Oil

Check the oil-oil on the engine, gearbox, axle, power steering, brakes, clutch. Check the quality and quantity as has been done while preparing for the long journey.

5. Engine

Check the power of the engine and sounds that arise in the machine. Is it still normal or not? You need to give more serious attention if engine power was reduced from the usual and many appear abnormal noises. When these symptoms appear, you should take your vehicle to the garage.

6. Activator-activator

Check the clutch, gearbox, coupling, axle, axles, wheel bearings, including the wheels. Listen carefully whether the sounds appeared abnormal when the vehicle moves.

7. The lights

Check all lights of your vehicle from possible break up. The use of light is longer and a higher frequency increases the likelihood of further damage.

8. The legs

Observe also the heaviest weight-bearing during the trip. Check the tire wear, the legs and suspension. Expenses are transported, road conditions, as well as highly affects mileage settingannya. Check the fastening bolts there are loose or not.

9. Last Kick

If lazy and pingin practical. Bring your vehicle to the garage just escaped official or garage and into a car wash. 'm In tune up the car again, replace the parts that feel is close to worn out or near term durability. And do not forget to calibrating legs through spooring and balancing.

Beware of Lack of Power When Start Engine

Under normal conditions, once the ignition is in position "on" and threaded into the key starting point, the engine immediately lit. However, in certain circumstances the opposite happened. The machine is not directly life and we must repeat several times fastening contacts to the starting point.

This condition is the beginning of kekurangberesan in electrical and machinery. And this is often experienced a car with fuel engine, especially those still using platinum ignition system.

Difficulties such as the engine of the above cases related to the problem of imperfect or incomplete combustion. Perfect combustion will take place provided that: the compression is still good, a mixture of fuel - air that right, and the initial position of ignition or sparks sparks is still accurate and still good. Marked blue flame on the end plugs.

Many possibilities that cause the machine less fit. But at least there are three possibilities that could be the cause.

1. Fuel Mixture

Kekurangtepatan tepatan mixture of fuel and air, as well as the quality of fuel can also be caused by incorrect carburetor settings. Too close / far apart on setting Idle Mixture Adjusting Screw (Imas) in the carburetor. (On machines with injection system, this usually occurs because of settings on the variable resistor is not appropriate.) Also can be caused by dirty fuel lines, fuel filter and air filter.

2. Compression

When the compression engine produced lower than required, is certainly will complicate the occurrence of combustion. Practical engine life difficult. Kekurangtepatan This could occur because of improper valve gap, there was wear and tear on the seat and valve head, a lot of carbon crust on the head and valve seat.

Can also be due to worn piston rings, worn cylinder walls, or cracked cylinder head gaskets. Damage to the components above can cause leakage of compression so that the pressure produced low machine.


3. Ignition

Sparks are less robust and less precise also can cause the engine hard to live. This condition is usually triggered by the platinum that has been worn, weak absorption condenser or anything because the value of the coil ignition coil resistance is high due to heat. If the components are still good that can be caused by changes in the early ignition and platinum crack size has changed. Re sets standard.

In addition, a weak spark and not appropriate can also be caused by high resistance spark plug wires and spark plug gap is too big.

Most riders just silence if you have a case that a little hard living machine. Maybe because the engine can still be turned on after several ignition is turned. In fact, if left it is quite possible that the effects appear much worse: the battery is worn out, for example.
Batteries can be worn out due to excessive use of electric current at start.

In addition to batteries worn out, if there is a mixture that is not appropriate (incomplete combustion) are clearly the next consequence is the reduced engine power and fuel consumption to be wasteful.

Actually, setting that supports excellence engine combustion system can be maintained if the rider does not ignore the schedule of periodic engine tune up. Because, at this time will be setting-adjustment and examination of the engine components.

So, remember. Do not forget the engine tune up periodically. In addition to comfort and security, from there small problems will be prevented so as not to enlarge

Three Steps to Efficient Fuel

It could save car fuel consumption is very interesting. In addition to the volume of the engine, fuel consumption rate is also determined by our style of driving, the engine condition and tire pressure of violence.

Like memblayer machine, speeding, playing with the acceleration driving force is part of the wasteful fuel. Conversely, driving with a quiet, gentle acceleration and placement of tooth gears that fit can suppress the consumption of fuel.

Of course you can not force economical V4 V8 car. Because of the capacity factor and machine design, weight and wind resistance (aerodynamics) vehicles, gasoline quality formula and you can not control. So mengemudilah with common sense. Routine maintenance and good driving habits will be helpful in frugality.



Acceleration Soft

Start driving more slowly, with gentle acceleration and braking slowly. The more speed, more fuel is needed. At the same time increase the risk. Choose the route with the least possible loss. Take advantage of the radio broadcast to it. The use of air conditioning and the excessive burden of forcing the engine to work harder. So the fuel consumption also increases.

Research in the U.S., the recommended speed is 55 miles per hour (89km/jam) on the highway. Try driving with constant speed. Take advantage of cruise control for long trips.

Know your Tire Pressure

When was the last time you check tire pressure (TAB)? Generally only checked when the vehicle speed disrupted. When TAB is less, the work will be heavier engine, automatic fuel consumption increases. It means that more often queued dipom gasoline.

To determine the optimum TAB, how easy. Previously used to prepare a tire pressure gauge of quality, paper and pen. And how to measure the exact TAB. The first step, check tire pressure before the car is used. Record the results as a result of the TAB cold measurements. Repeat the inspection at the time the car has been used as a measurement of heat TAB. Usually hot TAB TAB slightly higher than the cold. But the cold TAB was more accurate. Perform measurements on all tires. TAB specification which represents tire manufacturers spend this cold TAB.

Car assemblers recommend a different air pressure for front and rear tires. You should pay more attention to these recommendations than the number printed on the sidewall to determine your car TAB. Compare TAB cold with car assemblers recommendation. If different, then you should adjust them.

TAB Let cool 32 Psi, while the 35 psi recommendation automobile assemblers, mean 3 Psi to be added. If, TAB 34 Psi heat, then increase the tire pressure to 37 psi. Conversely, when the cold TAB higher than recommended minimum, the exhaust air pressure in accordance with the difference. This process also uses heat TAB benchmark. If the difference between cold and TAB recommendation is already known, for example 2 Psi, and Psi 38 TAB known heat, then reduce the TAB to the remaining 36 Psi

Obey Pattern Routine Maintenance

Most cars have been using the latest advanced technology such as electronic ignition which is simpler treatment. But still there are components that need attention, such as replacing air filters periodically.

Set the ignition timing back. Clean the spark plugs, ignition and ensure the functions work well. The existence of holes in muffler or exhaust pipe will waste fuel, noisy and smelly

Tips for Troubleshooting Car Broke Down

As a man driving a car, you certainly never feel one of the most unpleasant incident which never experienced a car driver that is on broke down. Genesis is certainly very annoying, especially when you're pressed for time to be able to get to somewhere.

Plus the fact that you do not understand about the ins and outs of machinery, complete already penderitaan.Untuk handle (especially for those who do not understand the car), there are short tips that might be implemented. Who knows, with this new knowledge, the car suffered damage is not severe and can still be tricked to get way down to the nearest garage. After all, you certainly do not want the car's favorite (or perhaps the only) placed in a strange place right? Here are tips-tricks:

1. Check the electrical power in the coil is connected or not
2. See distributor and paste into the car body, then check the starter cars have power / electric spark or not.
3. If no, check that the platinum is dirty or not.
4. Repeat step two, if there is ignition means the car ready for the road.
5. If still also try to check the fuel strike. Take a bottle, insert the hose into the bottle of gasoline and car starter. If the petrol out, meaning the fuel is still running fine.
6. If not out, meaning the pump / fuel filter is dirty. If this is not another, telephone garage so your car could be towed and repaired

Car Glass Cleaning from Mushrooms

Car glass is one of the vehicles is very important, because it can keep us in order to avoid ultraviolet light or rain water that often arise when unexpected. Not surprisingly, this section almost always looks dirty, but this will not be tolerated. Glass is too long not cleared will become dull and be where the growth of Mushrooms. To avoid it, clean your windshield with regularly within a certain period (if necessary every day in the rainy season).

To do so does not need to go to a beauty salon car, because it only takes simple objects that can be obtained from within the house such as bath liquid soap and sponge cleaning. Here are tips to clean the glass in order to avoid telling the fungus. The first step is to wash the affected parts of the glass surface stains / dirt with clean water. To do this, use a cloth that does not cause a rough surface on the fiber-fiber cloth can make your glass was smooth so it scratched and leave scars. Provide soap (liquid soap is usually mixed with water) to the glass surface, then wipe the foam merata.Untuk rinse, flush water to the surface followed by drying using a towel.

For this phase, so try not to wet wipes. Thus, the glass so free of stains and rust. As a treatment, avoid the parked car in a state of bronzed by the sun directly because it can accelerate the process of emergence of the fungus. Then, after every trip, do not forget to clean the car using a cloth or duster. And lastly, do not forget to clean the windshield at least every two weeks (of course besides washed).

Used Car Buying and Improving

Right now buying a used car needs to consider many aspects. Do not let you buy a car that turned out to gullible ex-collision or have other shortcomings. The first thing to check is the condition of the car body, the way to see the corners, especially the hood, rear trunk, and door pillars. Cars that have experienced a collision would not have a perfect seam, because as good as a fix-great mechanic, it is difficult to get close to original form.

Meanwhile, to check whether the car is still original color, just see the edge of the rubber or glass doors. Do not forget also to examine the completeness of the letters, so that will not find a problem with law enforcement agencies. When you've got a used car that you want, now the next step is to beautify the vehicle so as not to lose with the new.

The trick? Take it to the nearest car salons, or refer to the following tips ini.Salah an old car disease (except for previous owner painstaking) is part of a dirty car. To clean it, especially the upholstery and carpets, use a vacuum-cleaner. For a material made from skin, use a gentle baby shampoo, then gently wipe the seat using a sponge and warm water. For the carpet, you should look at whether the sections are damp or not. If the answer is YES, it means that part must be disassembled for inspection quencher. For a material made of wool, if wet it is advisable to replace with new. If not, stay dry in the sun to dry. On the ceiling, use sprays that are sold specifically to lift the stain attached, then wipe with a clean. Perform this process several times in order to get the maximum results.

The next step is to clean the car body. For the sidelines of the door, use a cleaning brush to remove dirt. If you want the dashboard shiny, use a polish of a special material that is not sticky and can make it look like new again. Use a powder which is used specifically for cleaning the salon car windshield to get perfect results. The same tactic could be used to clean the engine block to look like new. Use soap or a special cleaning, even if necessary you can use the polish to this section are sold at retail is a little difficult toko.Yang polish the body outside the car so shiny. Apart from having to use special shampoo car, you also need to have a cleaning tool which has now been sold freely in shops. The price may be a bit expensive, but, is not to get maximum results need a bit of sacrifice. Who knows, one day instead of opening your own salon car

Car AC Repair Tips

AC in a four-wheeled vehicle, gradually became a necessity. And function also can not be compromised again. therefore if the car air conditioner not working properly so vehicle crews sometimes go awry. When you open the glass entrance of dust and fumes. Meanwhile, if closed, the stale taste will attack.

So to overcome the obstacles mentioned, there are quick tips that can be done about it as an alternative before your vehicle checked at the hands of experts. Previously there may be a number of disorders that can arise until the AC function can not work optimally. Interference with the air conditioner evaporator discharge is usually due to congestion and cause itself that:

• Channel rubber squeezed or twisted.
Waste water will be turned up, when a channel full of water will overflow and escape from the outlet channel has been completed although clamp.

• covered with dirt.
Channels can exhaust tip covered with mud because these channels are under the car. Channel was separated from the evaporator outlet pipe.

Now to deal with is as follows:
1. Prepare flower screwdriver (+), and open the cover of the main pillars of the right and left that usually match the interior color.
2. Open the cover of the AC right and left with a screwdriver. Then switch off air conditioning by opening the cover 2 pcs screws. Then off 8 screws and 4 cover holder inlet and exhaust blower.
3. Open the screw cap 13 bottom blower, do it carefully and do not be forced to pull out now.
4. Check and clean the lid with a dry cloth. Observe the hose that pinched, twisted or loose, then update its position that no longer an interruption.
5. Make sure the compressor end of the hose clear of debris. Kemuaidna bunch return all components carefully.

So easy is not it ...? Good luck

Caring for Car Brake Discs

Brakes are one of the most vital part in the operation of your vehicle (car for example). The existence of brake is very important to give a sense of security when using the car, but the functioning of the device one is very much depending on how the way we care. If treatments are ignored, almost certainly not function as well optimal.Ujung-end, our salvation (and others) when driving terancam.Untuk keep the brakes remain standard is not difficult, provided we know how to tips-tricks.

The first thing to note is that the disc and drum break, and check the quality of brake fluid, brake lines, and the brake itself. For brake fluid, usually must be replaced or cleaned after a 10,000 km car travel. Note this section carefully so as not empty, and note the comparison between the front and rear (2:1). The front gets a larger portion because most often used when the car brakes.

The following step is to check whether the brake is still in good condition or not. The trick, remove the wheel to lock, consider the disc break and release the brake handle with a hammer or screwdriver. When the brake dirty, use sandpaper / brush / brush to clean it. The more brake cleaner, the better and stronger functions. Give the fat / grease on the iron holder, but avoid in order not to hit the brake shoe. Replace the canvass, and last kancingkan.Hal that must be considered so that the brakes always work so well is regular maintenance. As mentioned earlier, try to reach the oil changed every 10,000 km, while for the canvass is usually between 20-25000 km (automatic) and 40,000 km (manual). Do not forget to check the condition of brake fluid every two weeks.

Tips for Dealing with Car Overheat

As fun driving the car sometimes difficult invited compromise. Especially if the problem was located on a machine that "over heat". Two of the causes of heat over the radiator is leaking or maybe the engine cooling system that does not work optimally or damaged. For the second constraint mentioned no one tips you can do. Minimum car you can move up to the nearest garage.

Tips:
1. Open up your car's engine cover and disconnect the cable connecting the AC condenser.
2. Cable AC condenser which has been lost can you connect with a cable machine condenser.
3. When everything is installed, then you do not forget to remove the magnetic compressor. These cables are usually located not far from ac compressors.
4. After all this is accomplished is connected, then you just turn on the machine follows ac.



Basically, these tips work with the principle of your vehicle can move back to the cooling system from the AC condenser. So the risk is your vehicle to move towards the nearest garage, you can not enjoy the cool air conditioning during the trip.

What is written above is the tips that are used for vehicles that use a cooling system elektromotor. And of course it can be done if elektormotor not functioning properly.

Meanwhile, if overheating occurred due to the radiator is working less than optimal. Do not rush to open the radiator cap. Turn off your engine for a moment and let the radiator cool. Once cool, just open the radiator cap and add coolant or water as needed. While filling water into the radiator, try to make the machine alive.
Good luck!

Used Cars More Shiny with Varnishes

Got a car that dull? Now you do not have to feel inferior because it is now widely available service repair shop that can increase the prestige car that is owned by repainting without the expensive price tag. Of the several ways, one of the most commonly used is the one body. Actually it is not necessary, because in addition to more expensive, too time consuming. Now there are solutions that are easier, faster and simpler to smooth the body, namely by using lacquer as a coating. The time needed is not too long, but the result is the same.

To add your knowledge (while avoiding the usual trick of by unscrupulous repair shop who are not responsible), the following steps. The first step is to cover the wheel with a newspaper or other material so that the paint is not on this section. In addition, the lid also other parts such as front and rear glass, mirror, or a rubber door. If it turns out your car in dull conditions, then that section should be sanded again with coarse sandpaper.


The goal is to erode the old paint and the original color is almost no longer attached to the car body. After that use color lacquer painting with a special varnish that aims to show car shine. To dry the car entered into the oven with temperatures around 80 degrees for approximately 30 minutes. The purpose of the use of this oven is because the place is sterile, and ideal for drying heat of a freshly painted car body. After completion, the work still continues to let the paint dries and blends with the car body. Make no mistake, though appear it is dry, it's just the outside only, to the inner lining takes approximately one hari.Setelah paint on a car body completely dry, use fine sandpaper to hone granules of paint that (probably) to harden and form lumps -small bump. After that, then the last step is to do pemolesan.Dengan sisem done this, without painting a car body, your vehicle still look cool. Can a try ....

Safe Driving from Bad People

The situation in Jakarta is increasingly not safe to make the drivers to be extra careful when driving. Therefore, it is not unusual hold-up action or seizure by rogue elements not responsible for the unsuspecting motorists, and often do great in crowded places. Therefore, there is baikny you who often drive on the way to a place considering the following tips, which are actually very sederhana.Sebelum leave the car in the parking lot, make sure all car doors locked and windows shut.

This error is often done when someone parked in a place, as a result when returning the car had vanished and he only regretted biia fate. Do not forget, though has been locked out, check again Anda.Hal second vehicle is to never open a car window unless your vehicle speed fast enough. Indeed, the atmosphere is hot plus a car air conditioner that often die (or even not equipped with air cooling device) makes one often opens the glass to get fresh air. Avoid this: for the open car window often encourage people who intend evil to do hold-up. If closed, not necessarily he dared to do so.


Do not leave valuables in the car sat out, or put these items in places that can be seen from outside the car. This should be considered especially for the mothers, who often put a cell phone or a bag of money on the seat or dashboard. This includes the use of cell phones when driving, especially when the car stopped at a red light. In addition to endanger other motorists (especially when driving), HP is the most interesting items for the mugger to launch the action.

Lastly, do not forget to bring the security tools that can be used in an emergency. Objects such as wheel lock, pliers, wrenches, a baseball bat could be useful to defend yourself if one day you are forced to defend themselves from penodong.Saat stop at the intersection which are often prone, try to keep a distance from vehicles ahead. Thus, when surrounded by criminals, you just step on the gas and leave the place. And if the person being followed, never stop in a quiet place because it will only endanger your own safety.

Constant Vehicle, Fuel Efficient

You may often see drivers who often drive the vehicle in high speed, of course, with reasons for quickly get to their destination? But did you know that the vehicle is driven in speed above the average car fuel can drain faster than it should, not to mention the risk of accidents to be borne? To overcome the risk of wasteful gasoline, WHEELS team gives a few tips that may be useful for Anda.Langkah first (this is quite difficult, especially for those who have souls racers) is to keep the vehicle so that the rate remains constant. Each time you want to move the teeth, try to make the car the RPM range stands at 3000-4000 (for a gasoline vehicle) and 2500-3500 (for a diesel).

That way, gasoline / diesel fuel that is used as the primary energy resources to run the vehicle also 'burn' with the number konstan.Untuk uphill road, the speed and the above items are mainly to be addressed. As for the descent, the braking / brake use should also be constant in maintaining vehicle speed. Who stepped on the brake must be balanced, and keep that RPM does not exceed the specified limit (one way is to move the gear). In addition, the teeth play in your car so that the speed and the rate constant RPM.



The final step is in the open car window. Often times a travel near or far away (especially if the car is not equipped with refrigeration equipment), we open the car window so that cool air to flow inside. But make no mistake, if need be opened, try to do just one but both sides (left and right) windows are opened. Because if you only open one side only, then the air circulation will run only one direction (incoming) and by itself will hamper the rate of vehicle speed. Automatic, more fuel will be drained.

Door Car Care

The car door is a very important vehicle part to be treated, thus ensuring safety and comfort when driving. The car door often escape the attention of owners, whereas in case of damage can be fatal.

As a result,
For example, if the glass is brittle rails so that water can enter the crack in the door and make the driving mechanism rust windowpane. So when the ups and downs the glass will feel heavy and should be assisted by hand. Not to mention the sound of creaking, and the glass can be jam player instantly. Likewise, the handle of the door, if the lubricant to dry out the door opener mechanism, the door will be difficult to open.



Things You Do:
The following maintenance tips, you should be at least 6 months:
1. Provide the necessary equipment such as screwdrivers plus and min, brushes, diesel, grease and lubricant sprays.
2. Open the cover panels (door trim) with the position of glass dropped down. Open the door handle and bolt with a screwdriver handle plus. Then lever off the glass with a pick player pin.
3. Open the door with a screwdriver wear mencungkilnya min. For cars with 'power windows' come off the switch. Note the glass casing (weather strip) clean the dirt using a brush and diesel. Wait until dry. Or wash with soap and water after a dry wipe with a rag.
4. Clean teeth and rub with a fat regulator. Also gear motor drive for that use power windows. Lubricate also a player's arm and statement.
5. Check the regulator balancer shaft, top and bottom rails are also the driving shaft regulators. Clean with diesel and then spread with fat.
6. Set the glass is tilted to raise the glass half way and loosen the two bolts counterweight bottom. After that push the glass back and tighten the screw pengimbangnya.
7. Note the outer gate open, check whether there was a shift if it is enabled. If yes, lubricate with spray lubricant. When spraying, all check by playing outside and inside the door opening.
8. Check the door lock rod of iron. Especially the bottom of the key moves. Clean if corroded or dirty and spray lubricants.
9. When finished replace the door panels, for the power windows do not forget to plug the switch back.

Though Rarely Used Cars Preserved

Perhaps you are one of the people who are very busy, the task force to travel frequently out of town or the country in the long term. If you have a personal car, it should be noted that when you return later, the vehicle is not in the condition of abandoned or pathetic. The first step you should do is wash the car before it left. Then, follow these tips.

1. The position of the hand brake released
If left in a state of emergency brake in, especially in a long time, there will be adhesiveness between oil with disc brakes, especially for a vehicle that has a drum on the rear wheel. One additional thing, it's good to let it hang your car keys on the steering wheel of your vehicle. If your house has a maid, this will be very useful to heat the vehicle every day. But do not leave your car keys if you did not have a garage or out in the open.



2. Prop wipers with foam / wood
When kept in touch with car glass, rubber wipers will slowly harden and not flexible anymore. As a result, the rubber (the so-called dead rubber) will feel rough when later used to wash your windshield.

3. Keep all four tires in a raised condition does not stick to the floor
How, just by using a jack and a stand-jack. The goal is to awake the car's suspension and not burdened by the weight of the vehicle. A car that is never used in a long time usually suspension will go up and down, so that when used later, the car will feel uncomfortable.

4. Remove the battery if the car is more than two weeks left
Why? The reason is because car batteries are very sensitive. If the vehicle is not turned on at all in two weeks or more (especially if the house you leave no maid), it will affect the battery, which can be more easily damaged than the vehicle is used every day.

5. When the parking lot side, chock your tires with four beams
This applies to those that have a garage with sloping surfaces. In the first tips that are not mentioned either enter a position when the vehicle left the handbrake quite a while, but how if the surface is tilted? It's easy, just chock all four tires with blocks or other hard objects so that the car has not changed position.

6. Put the car freshener, and close the car with the cover
Fragrances serve to neutralize the musty odor that may arise because the space in a closed car in a long time. In addition, the car left in the open state also allows dust particles to enter the car through the cracks, a matter that is certainly not desired by every car owner. To avoid this, simply buy a car cover is usually sold in car accessory shops.

Car hard to start, how to handle it?

It's hard on the engine-starter or do not want to live is often a problem for one's private car, especially if it turns out the owner had no idea how to take care of the car. Do not let you be one among them who are blind technology, machine dead because not infrequently occur when you least expect it at all (for example ahead of important meetings). For that, consider the following tips. First thing to know is the car electrical system, conventional or modern cars are already using CDI (in the sense of all-electronic).



If your car has been using all-electronic system, do not try to fix it manually, because these systems require a reliable expert mechanic and equipment that exist only in workshops mobil.Biasanya there are two things that caused the car can not be the starter, the first is because the battery is already in good condition less electrical system. Both are due to electricity supply in the conventional magneto ignition systems. Platinum may not have been good. If the technology is more advanced, perhaps because of CDI. If already CDI problem, need to garage because already complicated and difficult to handle alone. On the upper surface of the battery there are indicators that show the latest condition of the battery. Show good battery condition / damage, or water storage battery kosong. If have checked but the car still did not get turned on, it could be caused by platinum and condenser. The problem is usually the plate contained in platinum. If bulge was dull means means can not capture the spark of electricity.

So that platinum could return to function properly, use sandpaper to remove dust / spots are attached. When you're done, plug it back in its original position. Platinum which has been cleaned will usually be able to lure big sparks so again, If not, then platinum was not used and should be the next replace. This steps is to check the fuse box. Note whether the fuse that was installed is still intact or not. If wire connections are broken, the fuse had to be replaced. For emergencies, you can use wire or fiber cable to be installed while the fuse was. It is not recommended as a permanent solution, because it changed as soon as possible by bringing the car to the garage.

The last thing that used to be the ringleader of a car engine can not be a starter is because the supply of fuel / air is lacking in the carburetor system (in this case means the filter is dirty carburetor.) Check the filter, remove filter and clean it with a brush or a toothbrush. Do not use a heating appliance such as hair-dryer and the like, because it can damage the walls of the air udara. If everything is done and no development, no can not, take your car to the nearest garage. Do-do, the damage not only on your battery or platinum.